Even when you have kept your heating system well-maintained, it's possible that the unit will still stop functioning as normal. It may be something that requires a simple fix, and knowing how to troubleshoot the heating unit can help save it from breaking down completely. However, depending on the type of problem you are experiencing with your system, you may be able to fix the problem. But if it's beyond your ability, it may be beneficial to have a heating contractor look over the system. The information below offers some basic tips for troubleshooting your heating unit.

Troubleshooting Your Igniter Or Pilot Light

One of the main components of your heating furnace, is the igniter or pilot light, which must be in working order at all times. This is because the igniter or pilot light, helps to keep the power on and forces the heat through the home based on the temperature of your thermostat. In some situations, it's possible that the pilot light may go out, preventing the heat from turning on. When this happens, you may need to jumpstart your heating system in order for it to start working again. This means, you will need to shut off your gas reset valve using the switch located on your furnace, then turn it back on again so it can ignite once again. However, if this does not work, you may need to contact a heating contractor to have your igniter or pilot light repaired or replaced.

Troubleshooting The Furnace Filters

Typically, the filter for your heating unit is located on the side of the housing component for your furnace. The filter is designed to keep the heat flowing through your ventilation system free and clean of all dust and debris. This is done by allowing the filter to collect dust and debris on the panel, instead of allowing it to become airborne. However, in order for the filter to work correctly, it should be checked regularly and cleaned or replaced as needed. It's essential to know the size of your filter, because they vary depending on the type of furnace you have in your home. The good thing is that the size is located in big numbers on the border of the filter, making it easy to replace.

The information highlighted above only touch on a couple of items you may need to troubleshoot on your heating system. If you are unsure of all the steps involved, consider consulting with a heating contractor. You can also visit websites like http://erickson-plumbingqc.com/.